Abrasives

Abrasives material
Abrasives
Plastic Media

Rubber mold. Clean plastic mold. Automobile parts, such as recycling

Recycling parts to the coating layer. Electronic parts such as lead frame to remove the thermal hardening resin flash

Non-ferrous metals and soft metal parts, such as the removal of Burr

 
model MC MB AC PA PC CG
TYPE III II V      
Mohs hardness 4.0 3.5 3.2~3.5 <3 <3 <3

BARCOL

hardness

64~74 54~62 46~54 HRM100~105 HRM70~74 HRM70~74
shape Granular Granular Granular Cubic cylindrical shape Cylindrical Cylindrical
proportion 1.5 1.5 1.15 1.13 1.2 1.2
Features The hardest - the resin particles in the cutting force of the strongest, and its rapid cleaning capacity close to the other sand. Commonly used - the most widely used, the largest amount of sand resin material, the use of various types of industrial minor cleaning work. Durable - is a special coating to remove the aluminum plate, glass fiber and composite materials such as the surface coating. Soft and durable - high impact strength, long service life. Can be frozen sandblasting - used in the cold than the overflow glue, a high impact strength, long life, room temperature can also be used. Can be frozen sandblasting - used in the cold than the overflow glue, a high impact strength, long life, room temperature can also be used.
use Replace glass beads, used in mold cleaning, hard materials such as engine parts, turbine blades and paint remover. Jet aircraft, trucks, trailers, trains, box cars, buses and naval vessels in addition to paint the fastest sand material. Spray aircraft shells, trucks, trailers, trains, box cars, buses and naval vessels. In addition to bakelite and semiconductor packaging parts of the overflow plastic and fine metal flash, and will not hurt the surface of the workpiece. In addition to rubber, plastic and plastic overflow of fine metal flash, and will not hurt the surface of the workpiece. In addition to rubber, plastic and plastic overflow of fine metal flash, and will not hurt the surface of the workpiece.

 

         
             
Granularity selection 12/16# (1.70~1.20mm)

16/20# (1.20~0.85mm)

20/30# (0.85~0.60mm)

30/40# (0.60~0.43mm)

40/60# (0.43~0.25mm)

60/100# (0.25~0.15mm)
20# (0.5mm)
 
30# (0.75mm)

40# (1.0mm)

60# (1.5mm)

80# (2.0mm)
20# (0.5mm)

30# (0.75mm)

45# (1.0mm)

60# (1.5mm)

80# (2.0mm)
20# (0.5mm)

30# (0.75mm)

45# (1.0mm)

60# (1.5mm)

80# (2.0mm)